Your 1988 Ford Hitch # C15300 has a Class V 2" hitch receiver. For a Class III, IV, and V trailer hitches, you will need to use a 5/8 inch diameter pin such as # e98881. If you are using this hitch with accessories and want an anti-rattle hitch lock, then # e99047 is a great option. view full answer...
As long as the door on your 1991 Jamboree is between 1-1/4" and 1-1/2" thick and the cutout is 2-1/2" wide x 3-1/2" tall up to 3" wide x 4" tall, you'll have no issues using the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black # 295-000019. To fill the space in the door, you'll likely just want to use some sort of foam insulation to keep cold air from entering any gaps and into the coach. If your cutout is larger than the above mentioned dimensions, you'll need... view full answer...
I do have a Class III hitch that fits your 1987 Ford F-150 with a 37-1/4 inch frame, however, it's not a Curt.
Take a look at the Draw-Tite Max-Frame Trailer Hitch Receiver Class III # 75038. This hitch receiver has a towing capacity of 5,000 lbs and a tongue weight rating of 500 lbs, which is more in line with the towing capacity of your F-150. It also features a concealed crosstube design, just like the Curt # 14001. That being said, Draw-Tite hitches are not manufactured in the USA.
If... view full answer...
We do not carry the Reico-Titan products so my research was more limited but after doing some research I was able to locate the installation instructions for the Reico-Titan Jacks. They have brackets listed specifically for the "C" clamp mounting style. I have included a picture from the installation instructions that shows how they attach.
The Replacement L-Bracket # LC182492 paired with the Replacement Flat Bracket # LC182494 is going to be more comparable to the bracket style used in... view full answer...
You can use the Hi-Rise Gooseneck-to-5th-Wheel Trailer Hitch Adapter # 9480 with a 5th Airborne pin box as long as it is not a Sidewinder 5th Airborne pin box. So if you have # 5AB-E1621-610, which is a regular 5th Airborne pin box, it will work with # 9480.
You mentioned a Un-A-Goose hitch which I have not heard of. If it is a Hide-A-Goose hitch then 9480 will work. But if not then the Hi-Rise is not confirmed as a fit for other models. view full answer...
It sure will. As long as your truck isn't a cab/chassis mode and doesn't have roll pan bumper, the Curt Class V hitch # C15300 will work great. I've linked to an install video showing the hitch being installed on a newer F250, but the fit would be the same for your truck as what's shown in the video. view full answer...
It sounds like you have the Extang Tuff Tonno Soft Tonneau Cover - Snapless J-Strip - Roll Up - Vinyl part # EX14510 on your 1989 Ford F-250 based on your description of roll up and velcro tarp. The replacement Tarp For Extang Tuff Tonno Soft Cover part # EX14510 is part # EX13510. view full answer...
The Vision X Headlight Conversion Kit part # VX-46 is a headlight housing and does not come with the headlight bulb. You can add the headlight bulbs to this housing using part # VX-L9007. You would need cut off your existing headlight bulbs pigtail and wire it to the harness included with the housing using part # DW01899-1. You will need 6 of the spade terminals in order to wire the new harness.
If your 1986 Ford F-Series truck uses a 9007 headlight bulb then you will not need to use the... view full answer...
It sounds like you have a short somewhere on your trailer stop/turn circuits on your 1985 Ford F-250. The Universal Wiring Harness # 22551 will fit your pickup and provide you with the connector needed for a brake controller like the Prodigy P2 # 90885 if that is the route you are wanting to take.
You can also check to make sure your current 7-Way connector is clean and free of debris as well as making sure your turn/stop circuits on your pickup don't have any shorts. By searching along... view full answer...
I have two different fifth wheel tailgates for a 1990 Ford F-350 Dually.
The Stromberg Carlson 100 Series 5th Wheel Tailgate, part # VG-100. This tailgate is the same design as the # VG-97-100 tailgate that you have referenced. It is a traditional, heavy duty steel tailgate. The # VG-97-100, you have referenced, is designed to fit a 1999 to 2012 Ford F-350. view full answer...
We have a chrome plated rear bumper that is a confirmed fit for your 1988 Ford F-250 and comes with the installation hardware needed.
It's the Westin Fey Surestep Rear Bumper with Custom Installation Kit, part # 21002-92230. It has 3 hitch ball holes with a towing capacity of 8000 pounds and tongue weight capacity of 800 pounds. I've linked to a video review of it below.
The one that you referenced, part # 76001, will not fit your F-250. view full answer...
If your 1989 Ford F-150 has a standard or step bumper AND the frame measures 37-1/4 inches from left to right (outside to outside) then you can use trailer hitch # 75038. If your truck has the deep drop bumper then you will need # 41504 with adapter # 01685. I have linked instructions for each of these hitches for you.
If you plan on doing some towing I also recommend etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin with clip, and a storage... view full answer...
There isn't a left and right side version of the Bargman trailer taillight part # 30-84-509. You can run either on either side. These also do not require a gasket either. view full answer...
The grease seal used along with an L44649 outer bearing and L68149 inner bearing is a 10-19, part # RG06-050 which measures 1.719" inner diameter x 2.565" outer diameter. view full answer...
Yes if your camper is pre-wired for a Furrion camera system, then the:
-Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS05TASF will work perfect for you!
However, there should've been a plate or sticker on the camera housing on your trailer that will let you know that it is meant to be used with the Furrion Observation Camera.
Attached is an installation video for you to check out as well. view full answer...
When installing the B&W Companion # BWRVK3050 the entire hitch adapter must be able to be lowered in order for you to use it. Unfortunately, you will not be able to use this adapter since you cannot fit the Companion in the recess on your truck.
Instead, you need the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball - Single Jaw - 21,000 lbs # DM8550046. This will allow you to convert your recessed gooseneck hitch into a 5th wheel hitch. In order for this to work... view full answer...
The Hopkins EasyLift Truck Bed Tailgate Lift Assist item # 74211 is compatible with your 1988 Ford F-150 so long as it is NOT the step-side bed model.
The bar installs between the truck bed and the tailgate, allowing it to work with truck toppers, tonneau covers, and even spray-on and plastic bed liners. You will be able to lift your tailgate with ease because the torsion bar makes your 30- or 40-lb tailgate feel like it weighs just 4 to 7 lbs. view full answer...
I've confirmed with my Westin representative that their # 20000-92230 Universal Series Step Bumper and install kit is compatible with your 1990 Ford F250. The install kit will allow the bumper to install without needing to drill any holes. We're fully confident it'll fit.
If you click the provided link, you can see a product description video featuring this bumper. view full answer...
The Curt A30 part # C66HR does fit the same base rails as the A25 you have now and are considering selling. So the A30 would easily replace what you have and offer more weight capacity. view full answer...
Yes they sure do; your 1986 Ford F-150 is compatible with the universal rails from Curt, which are the following part number:
- Curt Universal Fifth Wheel Base Rails with Installation Kit # C16200
These rails will give your '86 F-150 standard 5th wheel base rails so you can use a 5th wheel hitch; if you have a short bed you will need a sliding hitch such as the sliding Curt E16 5th Wheel Trailer Hitch w/ R16 Roller # 16516, or for a long bed a fixed hitch like the Curt E16 5th Wheel... view full answer...
Go To Results